1/10 EVADER EXT2 ALL COLORS RTR Electric Truck (Only Two Left! Yellow or Red)

Description

Please specify color choice.Will attempt to fill as requested. This is the 1/10 scale electric powered, radio controlled, Ready To Run DuraTrax Evader EXT2 Off-Road Stadium Truck.FEATURES: Chassis: Composite tub Drive: Rear wheel shaft type Ball Bearings: Full set, 14 totalMotor: DuraTrax Photon Speed 2 Radio: 2-channel Tactic pistol grip 27MHz AM, with steering andthrottle trim and reverse, (transmitter does not have charge jack) TSX200 steering servoElectronic Speed Control: DuraTrax Sprint with reverse, Evader DTESC mountBody: Trimmed and painted stadium truckShocks: Oil-filled, plastic body with metal shock caps Gearbox: Closed rear Differential: Gear typeTransmission: Single speed with metal idler gear Slipper Clutch: Adjustable, matches power delivery to the tracksurface, for better traction and speed.Protected from debris bya cover, and has a removeable cap for easy access for adjustments. Tires: All terrain, treaded 3.8″ (94.5mm) diameter, 2″ (51mm) wide Wheels: Nylon construction, black in color, six split spokes, 2.2″ (56mm) diameter, 2″ (51mm) wideBattery Strap: newly designed to accept a 2S LiPo batterySpur Gear: Nylon 88 tooth, 48 pitchPinion Gear: Steel 20 tooth, 48 pitchCamber: Adjustable, camber refers to the angle of the tops of thetires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassisSuspension: Adjustable, includes steel turnbuckles that arefactory-set, but adjustable to various driving conditionsSteering: Bell-crank type with servo saver One-year Stress-Tech free replacement guarantee (see comments) Warranty Period: 90 day limited beginning at date of purchase INCLUDES: DuraTrax Evader EXT2 assembled Stadium Truck with motor, radio, ESC, full ball bearings, decal sheet, painted body and manualREQUIRES: AA Batteries: 8 for radio transmitterBattery: 6-or 7-cell stick pack with standard connector (if using a7-cell, remove foam battery spacer block under the ESC)OR 2S LiPo pack (Low Voltage Cutoff strongly recommended if using LiPos)Charger: AC/DC Timed or Peak for 6-cell batteryMisc. Items: Track equipmentSPECS:Vehicle- Length: 16.1″ (409mm)Width:12.9″ (327mm)Height:6.6″ (168mm)Weight:3.6lb (1.63kg)Wheelbase: 11.6″ (294mm) Front Tread: 11.5″ (292mm) Rear Tread:11″ (279mm) wheels on-center side-to-side Front Track: 12.4″ (314mm) Rear Track:12.8″ (325mm) wheels at outer edges Ground Clearance: 1.4″ (36mm)Body-Length: 15.3″ (390mm)Width: 6″ (152mm) at front wheels, narrowest point Width: 6.7″ (170mm) at rear wheels, widest point Height:4″ (103mm) COMMENTS: The DuraTrax Evader EXT is available with the following radiochannels and body colors;A1 Black, DTXD32A1 A3 Red, DTXD32A3A2 Blue, DTXD32A2A4 Yellow, DTXD32A4If a replacement steering servo is needed, order the Hobbico HighTorque Servo, HCAM0165, or the Duratrax SX200 High Torque Servo, DTXM3301 For replacement ball bearings use: Qty.SizeLocationQty.Bearing Set 4 5x10mm Rear Hubs2 DTXC1535 4 3/16×3/8″Front Hubs 2 DTXC1423 2 5x10mm Top Shaft1 DTXC1535 2 5x11mm Idler Gear 1 DTXC1547 210x15mm Diff Gear1 DTXC1595Stress-Tech Free Replacement Parts Guarantee-“DuraTrax is so confident in the quality and durability of Stress-Tech plastic parts that they will replace any Stress-Tech part that breaks during the first 12 months you own your DuraTraxEvader ST RTR.Just send the broken part to DuraTrax and they will send you a FREE replacement.See the instruction manualfor mailing address and details.”Note: This warranty is ONLY available directly from DuraTrax.It is not available from placeof purchase. jxs 08/09/10 ir/jxs BOX DIMENSIONS: 14.25″ W. X 8.75″ H. X18.25” L.BOX WEIGHT:5.91 LBS